Help me pick an axle

[Lrgrnr]

Got this from Brian @ Diamond.........

Hey Brian, I'm in search of a hybrid 60 front axle (toy 8" third and 60 outers). Let me know if you can do this for me.


We can, rough cost would be 4600 with axle shafts, hubs, brakes, locking hubs, less steering and 3rd member. This would be with kingpin style knuckles.
__________________

[yotarob]

Got this from Brian @ Diamond.........

Hey Brian, I'm in search of a hybrid 60 front axle (toy 8" third and 60 outers). Let me know if you can do this for me.


We can, rough cost would be 4600 with axle shafts, hubs, brakes, locking hubs, less steering and 3rd member. This would be with kingpin style knuckles.
__________________

Wholy SHIT that is spendy!

[BearsFan07]

ouch

[Lrgrnr]

Wholy SHIT that is spendy!

If that is with a built third then it's not bad......but spendy yes.....

[Mauzer]

If that is with a built third then it's not bad......but spendy yes.....

It says w/o steering and 3rd

[BearsFan07]

So you are looking at over 6 grand once its all built.. damn. Time to sell a kidney.

[Lrgrnr]

I think I'm gonna pass on a Diamond housing.........diff would be around $1700

[Lrgrnr]

http://www.currieenterprises.com/ces...55&p=1699.9500

[BearsFan07]

That adds up fast!

[Lrgrnr]

built rock jock is gonna be $7240 with ARB and 4.88's ready to go.

[Mauzer]

http://www.currieenterprises.com/ces...55&p=1699.9500

Wow...just "built" one and it got spendy quick! >$7500!

[Lrgrnr]

That adds up fast!

yes it does!

[Lrgrnr]

Still waiting on RuffStuff's quote on the Hybrid 60.

[Lrgrnr]

why the hell couldn't this just be the right size?

http://ttora.com/forum/showthread.php?t=175775

[BearsFan07]

That is a good deal.

[Lrgrnr]

https://www.allprooffroad.com/images...structions.pdf

Makes it seem simple.

[Lrgrnr]

https://www.allprooffroad.com/images...structions.pdf

Makes it seem simple.

i like how their instructions say to weld it on and grind smooth..........they must have some shitty welds!

[Lrgrnr]

got this from Allpro


Larry we do no longer offer that axle the ones we offer now if a rock jock 60 and does not take the Toyota 3rd. The people making an axle like you are looking for would be diamond housings. For the 06 Tacoma the link and bracket kit is $1900.00 and the SAs steering kit is $749.00

Thanks,
Kurtis Taylor
Sales/Internet Sales
951-658-7077
kurtis@allprooffroad.com

[Lrgrnr]

Might pick up the Link kit and steering kit from them.

Comes with the following

Link and Bracket Kit:
2 - Shock Towers with ½-13 x 5” Bolts,
Washers, and Stover Nuts
2 - Lower Shock Mounts with Gussets and
Sleeves, ½-13 x 2.5” Bolts, Washers, and
Stover Nuts
1 - Engine Crossmember with PS Frame
Reinforcement Plate
1 - Panhard Bar with 5/8” Heims and Jam Nuts
1 - Upper Link with 7/8” Heims and Jam Nuts
2 - Lower Links with 1.25” Johnny Joints and
Jam Nuts
1 - Panhard Frame Bracket with 5/8-18 x 3.5”
Bolt, Washers, and Stover Nut
1 - Lower Panhard Bracket with 5/8-18 x 2.5”
Bolt, Washers, and Stover Nut
1 - PS Frame Link Bracket with 5/8-18 x 4”
Bolt, Washers, and Stover Nut
1 - PS Lower Link Bracket with 5/8-18 x 4”
Bolt, Washers, and Stover Nut
1 - DS Frame Link Bracket with 5/8-18 x 4”
Bolt, Washers, and Stover Nut, ¾-16 x 3”
Bolt and WashersAll Pro Off Road 541 N Palm Ave Hemet CA 92543 951-658-7077
1 - DS Lower Link Bracket with 5/8-18 x 4”
Bolt, Washers, and Stover Nut
1 - Upper Link Housing Bracket with ¾-16 x 3”
Bolt, Washers, and Stover Nut


Steering Kit:
1 - Linkage Kit (Large and Small Joints, Slip
Shaft)
1 - Remanufactured IFS Steering Box
1 - Firewall Plate
1 - Pitman Arm
1 - Steering Box Mount (2 Plates, 3 Sleeves
with ½-20 x 4” Bolts, Washers, and Stover
Nuts)

[drew02a]

Just get an FJ 80 front axle. The savings would justify buying a conventional passenger drop Gear Drive T-case to mount befind your crawl box. Plus you could make some money off of that FJ case you've got now