1980 Truggy - Clockwork Orange aka Flat Belly Pig

[Silverback]

I had those for Clyde. Didn't install them, but had them for when I redid the suspension. Pretty nice, but I've read mixed reviews on them.

 

[TacoXpo]

Yes TG. Thought about them - I figure I need some feature shrink so that I can play sooner than later.

This week - bad news - that craftsman rear with the big studs and the shaved bottom - well - It will be sold - buying a TG Rock Assault for one reason - so that a trail spare diff would be able to be put in on the trail - otherwise I'd have to open up the holes on the new diff and not be able to share spared on the trail!!! - bummer!

 

[Silverback]

This week - bad news - that craftsman rear with the big studs and the shaved bottom - well - It will be sold - buying a TG Rock Assault for one reason - so that a trail spare diff would be able to be put in on the trail - otherwise I'd have to open up the holes on the new diff and not be able to share spared on the trail!!! - bummer!

Cool!! Nice to have a trail spare.. very cool!

 

[TacoXpo]

 

[AlienXtx]

very nice ^^

 

[Silverback]

 

[TacoXpo]

I was looking forward to using all the 'home brew' stuff on this but...

 

[AlienXtx]

I like the fill/inspection piont. wish the stock Taco one had that because I need to add more fluid to mine because of the angle and that pos we have is going to make that a bitch.

 

[yotarob]

I like the fill/inspection piont. wish the stock Taco one had that because I need to add more fluid to mine because of the angle and that pos we have is going to make that a bitch.

Take you diff breather extension off of the axle housing and add a little through that hole.

 

[AlienXtx]

Take you diff breather extension off of the axle housing and add a little through that hole.

good idea, need to steal my pump and left over oil from your house.

 

[yotarob]

good idea, need to steal my pump and left over oil from your house.

I'll bring it on Wednesday, and the box for your Dewalt saw

Sorry to jack your thread "Roger"

 

[TacoXpo]

Anyone know where I can get front spring perches for my pig?

 

[drew02a]

Anyone know where I can get front spring perches for my pig?

TG?

That's where I got the rear ones for the 'runner

 

[taco4x4rar]

Anyone know where I can get front spring perches for my pig?

Trailgeat or ruffstuff should have them. If they don't then it wouldn't be hard to but a standard one down on one side. That's the nice thing about yota axles pig isn't cast makes spring perches easy to deal with. On kinda stuck with the pinion angle on mine as the perch is cast into the pig still not real sure what I'm hobnail do about pinion angle while trying to avoid cutting and turning the inner C's.

 

[TacoXpo]

TG?

That's where I got the rear ones for the 'runner

Rears only. - I could cut theirs but I would rather have some 'read-to-burn' ones.

Trailgeat or ruffstuff should have them. If they don't then it wouldn't be hard to but a standard one down on one side. That's the nice thing about yota axles pig isn't cast makes spring perches easy to deal with. On kinda stuck with the pinion angle on mine as the perch is cast into the pig still not real sure what I'm hobnail do about pinion angle while trying to avoid cutting and turning the inner C's.

Cool - I will check.

 

[drew02a]

So, you don't want this type?

http://www.trail-gear.com/spring-hanger-kit

 

[taco4x4rar]

So, you don't want this type?

http://www.trail-gear.com/spring-hanger-kit

No he's looking for a diff side spring perch for the front axle, needs to have a large radius on one side as the one side sits on the pumpkin and the other on the axle tube.

 

[TacoXpo]

Just got off the phone with RuffStuff - good folks - after all the discussion - order plain and cut one! Seems like good folks!

 

[TacoXpo]

 

[Silverback]