Night Angel Build

[night_angel]

after 8 hours of work,heat gun whit a "custom" roller made by me (I put a pic) tomorrow, Im finish...

I was fixing "order" the car audio cables...that's me ..with the green shirt...

I use 13 Dynamat Sheets on the floor.

 

[night_angel]

Looks good man. Should quiet things down a ton

thanks! I immediately noticed the difference...I'm happy

Excellent work Thomas. Do yours doors as well if you haven't done so already.

Yeah...I have to make the doors too, but I'm between the doors or the roof... I only have 5 Sheets...

 

[Silverback]

Great work keeping all the labels oriented.. looks great. I have multiple layers in my truck but they don't look that nice.

 

[night_angel]

Great work keeping all the labels oriented.. looks great. I have multiple layers in my truck but they don't look that nice.

yes,I keep an eye on their orientation, I wanted, make it presentable for a photo... ...I think it is cute

 

[AlienXtx]

Nice work Thomas.

 

[night_angel]

my new Winch Rope M-P Superline XD! thanks BearsFan07, for the recommendations!
2 Smittybilt 3/4" Black D-Ring + Daystar D-Ring Isolator, for my rear bumper, and some ARB Snatch Block, for 7000kg..

 

[Anathollo]

Looks good Thomas! Dynamat the doors for sure. You'll notice a difference. I know I did.

 

[night_angel]

soo.. the masterpull rope is installed! ...

and I buy 2 Kenwood (KFC-XW1200F) Slim Sub`s for the taco... I have now one MTX 12" slim, and I can find the same sub to buy here.., so buy 2 new ones, and that MTX I use for another project...

 

[night_angel]

I almost forgot, the negative of the day .. My A/C stopped to working...the A/C light blinks , and the compressor not turn on... =/ DEAMMM!

I take my taco to the mechanic, to change a front differential bearing, driver side loses a little oil, fix that, and a starter maintenance, to Change "the coals" and now the truck start`s much better... but the A/C, have a problem...!!!I hate this kind of problem...

 

[drew02a]

I almost forgot, the negative of the day .. My A/C stopped to working...the A/C light blinks , and the compressor not turn on... =/ DEAMMM!

I take my taco to the mechanic, to change a front differential bearing, driver side loses a little oil, fix that, and a starter maintenance, to Change "the coals" and now the truck start`s much better... but the A/C, have a problem...!!!I hate this kind of problem...

There for awhile my AC was hit or miss. Everything looked normal, but it wouldn't get cold. It would start working eventually though.

 

[night_angel]

I hope so,I check the relay (change the relay with the fog light relay) and fuse it ok, everything is fine

 

[AlienXtx]

Could be a bad pressure switch not letting the compressor come on. Find those and jump them out one at a time. Should be one on high pressure and one on the low.

 

[night_angel]

Could be a bad pressure switch not letting the compressor come on. Find those and jump them out one at a time. Should be one on high pressure and one on the low.

or the Clutch assy...

 

[night_angel]

Could be a bad pressure switch not letting the compressor come on. Find those and jump them out one at a time. Should be one on high pressure and one on the low.

I found the problem, the wire from the Clutch assy, was cute... and now... the A/C work without problems.. =D

 

[AlienXtx]

Sweet, glad it was a easy fix. A/C is a MUST!

 

[night_angel]

Sweet, glad it was a easy fix. A/C is a MUST!

yeah, with +100F... is not funny without A/C...

 

[night_angel]

I think I'm almost done with the rear bumper!

 

[drew02a]

yeah, with +100F... is not funny without A/C...

Same here in South Texas

 

[night_angel]

Today I bought a sheet of MDF, to make a bigger box sound, for my 2 kenwood sub`s..a friend did the paparazzi photo jejeje...and another friend will make the box for my, for a cheap price...

 

[Anathollo]

Nice! You gotta love friends with skills!