Tools!

[TacoXpo]

I bought a welding extension cord from Northern Tool. got a great deal on it.. $50. http://www.northerntool.com/shop/to...Safety&mkwid=s4ZInD2yQ&pcrid=15682114391&mt=b

Just wish it was a LITTLE bit longer.. to reach out into the driveway more.

I think we have a consensus - we all would like to be a little longer!!!

 

[DemonSpeedn]

I think we have a consensus - we all would like to be a little longer!!!

Why else would we drive lifted trucks with big tires

 

[TacoXpo]

Why else would we drive lifted trucks with big tires

Good point!!!

 

[Silverback]

Yeah that too I suppose. I want it to reach out into the driveway.. just need to be sure and not let the wife run it over.

 

[TacoXpo]

Yeah that too I suppose. I want it to reach out into the driveway.. just need to be sure and not let the wife run it over.

Combo 'spike strip' and 'extention cord!'

 

[Silverback]

:eek: Cordless Ingersoll Rand impact wrench with 780 ft-lbs in reverse, 1100 ft-lbs in fwd! DAMN!

http://www.ingersollrandproducts.co...ess-tools/w7150-1-2-20v-high-torque-impactool

 

[drew02a]

:eek: Cordless Ingersoll Rand impact wrench with 780 ft-lbs in reverse, 1100 ft-lbs in fwd! DAMN!

http://www.ingersollrandproducts.co...ess-tools/w7150-1-2-20v-high-torque-impactool

WTF, so if you tighten something all the way, there's no way you could remove it with the same wrench?

 

[Silverback]

guess so.. its probably designed to just break shit.

 

[Broker]

Yea like a wrist maybe. That seams a little overkill. I wonder how long the battery life is

 

[TacoXpo]

WTF, so if you tighten something all the way, there's no way you could remove it with the same wrench?

Coming to a Goodyear near you!

 

[Broker]

So what are you doing for floor jacks?
Currently I'm using an old craftsman and its starting to bother me because it takes a hundred or so pumps to max and it isn't tall enough to even lift my tires off the ground. It goes up to around 20" and using it off the front cross member I have the shim the jack by about 4" to get the front wheels off the ground. Is everyone else just using a hi lift off the front bumper or sliders?

 

[TacoXpo]

I use a HF aluminum - I think they call it a race jack. One thing to note:My brother would also me if I put any hydraulic jack away with it closed. He always wanted the seals in a neutral position so as not to crush them while not in use. I use a hydraulic bottle jack quite often too. I also want to weld up some attachments so that it conforms to the axle housing and lower control arm.

 

[drew02a]

I use a hi-lift

or jack off the LCA...

Yes, I said "Jack Off"

 

[TacoXpo]

I use a HF aluminum - I think they call it a race jack. One thing to note:My brother would also me if I put any hydraulic jack away with it closed. He always wanted the seals in a neutral position so as not to crush them while not in use. I use a hydraulic bottle jack quite often too. I also want to weld up some attachments so that it conforms to the axle housing and lower control arm.

Damn autofuCkincorrect. My brother would SLAP me.

 

[Anathollo]

I finally had to do a job to justify buying these. My hammer drill is just too big to for some jobs(that's what she said). Bought em offline for cheaper than I could find in the stores.

 

[TacoXpo]

sweet

 

[Anathollo]

sweet

Yeah these are gonna pay for themselves today with the job I'm doing.

 

[garzanium]

Cut the 8x8 to use with my factory jack to work with my lift.
Got the Stihl for my bday!

Sent from my LG-P999 using Tapatalk 2

 

[AlienXtx]

Got me a new impact, only weights 4lb and puts out 750ftlbs.

 

[TacoXpo]

And those new ones are much quieter too!