AlienXtx
Nignog
And those new ones are much quieter too!
I'll find out here in a few, got to change out the studs on a D70 rear axle.
Tools!
- Thread starter Silverback
- Start date
I'll find out here in a few, got to change out the studs on a D70 rear axle.
Cut the 8x8 to use with my factory jack to work with my lift.
Got the Stihl for my bday!
Sent from my LG-P999 using Tapatalk 2
Yeah I love my stepdad's. Thats a badass chainsaw.
Got me a new impact, only weights 4lb and puts out 750ftlbs.
Nice! Don't break your wrist.
On another note. I was at HD today to buy a pocket sized (for electrical) butane torch to melt some shrink wrap(really narrow spaces that I'm connecting these wires in) and the lady couldn't scan the code, so she just threw it in the bag and told me it was "customer appreciation day". So I paid 2$ for some bolts I was buying and walked out. So I got a $20 torch for free
Silverback
Lima Gulf Bravo Foxtrot Juliet Bravo
thats freaking awesome!
Silverback
Lima Gulf Bravo Foxtrot Juliet Bravo
I have it to build a rack basket. Which I haven't done yet.
Boomtacoma01
Tommy want wingy..
Just ordered a new circular saw to replace my old, worn out, hand-me down saw that my dad gave me.
Its an Evolution Rage-B 7 1/4. It come with 2 of the multipurpose TFT blades and on of the Diamond blades.
Pretty stoked about this saw. It cuts through just about anything.
Sent from my SPH-L710
Its an Evolution Rage-B 7 1/4. It come with 2 of the multipurpose TFT blades and on of the Diamond blades.
Pretty stoked about this saw. It cuts through just about anything.
Sent from my SPH-L710
Silverback
Lima Gulf Bravo Foxtrot Juliet Bravo
I borrowed Gerardo's Rage chop saw. Damn fine tool! Beats the shit out if the abrasive grinder style chop saws. Haven't tried the handheld version.
Silverback
Lima Gulf Bravo Foxtrot Juliet Bravo
So I finally got around to installing the SWAG Offroad air-over-hydro setup for my JD2 tube bender.
First I had to build some legs, the Milwaukee cold cut saw worked awesome and made super clean cuts.
But it turned out pretty good. Still needs a coat of paint and I also want to add some heavy duty springs to return the ram to neutral when the valve is released.
My daughter decided to decorate it for me.
First I had to build some legs, the Milwaukee cold cut saw worked awesome and made super clean cuts.
But it turned out pretty good. Still needs a coat of paint and I also want to add some heavy duty springs to return the ram to neutral when the valve is released.
My daughter decided to decorate it for me.
tex
That's Mr Asshole to you
I thought about that too. I am using for the first 3' of the wall in my man cave kind of like wayne's coat. I was thinking of something that would cut it like a saw or shears instead of grinding through it.
tex
That's Mr Asshole to you
I've put in a few sunroofs and van windows back in the day and those drill snips are the way to go! Drill a hole and you are off to the races with great accuracy.
Just searched for drill snips and that looks pretty cool. I will do some more research on those.
Silverback
Lima Gulf Bravo Foxtrot Juliet Bravo
Get hearing protection.. cutting tin is noisy! But that would look good on the walls. I contemplated doing similar but I think I'm going to go with either a concrete bead board.. looks like wainscoting but its waterproof or buying 4x8 sheets of thin colored PVC. Cheap and don't have to worry about paint. This way I can pressure wash the bottom 3' of the garage without worry that it will damage sheetrock. Use some PVC baseboards and seal em up with silicone. Should be pretty waterproof yet look like normal.
tex
That's Mr Asshole to you
Good idea Sean. The room I am making he man cave is a detached building the previous owner used as a pipe smoking room and to work on instruments. It's about 250 square feet with a little attic space.
Once the tin is up I am going to put a 2x6 on top so there is a shelf around the entire room. Going to cover the entire shelf with bottle caps and coat it in poly urethane. The rest of the wall will be covered in weatherd fence panels cut in a staggered pattern. Build a bar and convert the soon to be old kitchen fridge into a kegerator.
Card table, TV and maybe an old arcade game is in my vision.
Once the tin is up I am going to put a 2x6 on top so there is a shelf around the entire room. Going to cover the entire shelf with bottle caps and coat it in poly urethane. The rest of the wall will be covered in weatherd fence panels cut in a staggered pattern. Build a bar and convert the soon to be old kitchen fridge into a kegerator.
Card table, TV and maybe an old arcade game is in my vision.