Tools!

[Silverback]

Picked this up to toss in the center console. Edit.. second thought, tossing it in the work bag along with that Wiha bit set.

 

[balakay]

Yeah mine was cutting it like shit. Ended up using a couple of cut off wheels to finish it

I highly prefer a torch to a plasma cutter these days. Just so much more versatile. And with a little bit of practice, cuts are just as clean as with a plasma.

 

[PSU Taco85]

Not really a tool, but I made these for my grease guns, finally got them out of a 5 gallon bucket and mounted next to my lift. One for mobile 1 grease and the other has mobile XHP 322 for the tractor. Used 3” PVC pipe and a cap so grease won’t leak out the bottom onto my floor.

 

[achirdo]

Not really a tool, but I made these for my grease guns, finally got them out of a 5 gallon bucket and mounted next to my lift. One for mobile 1 grease and the other has mobile XHP 322 for the tractor. Used 3” PVC pipe and a cap so grease won’t leak out the bottom onto my floor. View attachment 21776

Might have to do something similar. Mine are currently leaking all over my Milwaukee battery chargers

 

[CowboyTaco]

Nice!

Yep, I lay mine on a metal surface so that I can easily wipe up what leaks out.

 

[xJuice]

Good to know I'm not the only one with a leaky grease squirter.

 

[Anathollo]

Good to know I'm not the only one with a leaky grease squirter.

 

[CowboyTaco]

Seems well made. I mistook the box for saying that it included the polishing pad, not just the hook and loop thing that the polishing pad attaches. So now I need to get a polishing pad.

Normally $79. Parking lot sale had it at $59 and I got to use a 10% off Bauer coupon in addition. Not a bad score if it works like advertised.

 

[Oswego]

Good to know I'm not the only one with a leaky grease squirter.

I think anyone who has ever used Mobil 1 has the same slippery floor

Good idea Ant - I need to do the same. At least my shed floor will never rot under where I store my guns

Whats the hole for overflow?

 

[Silverback]

Probably to screw it to the wall

 

[Oswego]

Probably to screw it to the wall

Makes sense

*facepalm*

 

[Silverback]

I'd like to do it and add a petcock with a drain tube to the bottom. For when it does fill up.

 

[Silverback]

Or better.. have the bottom PVC cap with the ability to unscrew so you can wipe it out.

 

[Silverback]

Now that I can see it on something bigger than my phone, maybe those caps are just press fit on and its not an issue. Probably the case.

 

[Taco Loco]

I have one grease gun that does not leak, I will have to check brand, the other one does some and the third one I had went to the trash.
If you got extra freezer room in the garage or shop, you can store it in there, the grease will not freeze or leak.

 

[Oswego]

I just need to stop using Mobil1. It separates out it's lube way to easily with the slightest amount of heat and that can't be good.

Project farm did a grease comp on youtube, but I haven't watched it yet.

 

[Anathollo]

Damn... definitely will be upgrading in the future. Folding it in half is suwheet!

 

[Oswego]

My old ass craftsman has a quick release in the same location for swapping out the heads. Hopefully DeWalt has figured out how to keep the crap out of the driveshaft connection point unlike my Craftsman. I need to clean and grease the shaft every season because crap gets in there. I mean I'm sure I really don't, but it's a 4 stroke that's been running 15 years with the only new parts being spark plugs, air filters, and this year a primer bulb so I'm thinking the maintenance helps.

 

[Silverback]

 

[AlienXtx]

Fo'free!
My facility maintenance guy (yes the one I zip tied the drive shaft on ) grabbed this out of the trash pile at his apt complex this morning. They tossed it out because it wouldn't run. Pulled a sling blade

on it and just added gas, fired right up. Only cost me a $30 hose.