Tools!

[Anathollo]

Burned out my old corded DeWalt grinder. So I ordered the slightly more expensive corded DeWalt grinder as a replacement.

I looked at the Milwaukee corded grinder but couldn't justify it being double the price of the DeWalt and almost the same specs.

I have a cordless DeWalt grinder that I use 90% of the time but I still think you should have a corded grinder on hand for harder jobs that take awhile.

 

[PSU Taco85]

Burned out my old corded DeWalt grinder. So I ordered the slightly more expensive corded DeWalt grinder as a replacement.

I looked at the Milwaukee corded grinder but couldn't justify it being double the price of the DeWalt and almost the same specs.

I have a cordless DeWalt grinder that I use 90% of the time but I still think you should have a corded grinder on hand for harder jobs that take awhile.

what model did you go with? I was wanting to pick up a second one so I can keep one set up for grinding and one for cutting.

 

[Silverback]

Went and ordered a 3rd 44" HF roller cabinet. Time to do some organizing. Figure I'll have one with the top drawer and 3 drawers below that for SAE, another one for Metric and the 3rd will be pliers and whatnot. Plus I'll use the top of the 3rd one for my bench grinder and bench sander. Just have to wait about a week to 10 days for it to be shipped to the store.

 

[PSU Taco85]

Went and ordered a 3rd 44" HF roller cabinet. Time to do some organizing. Figure I'll have one with the top drawer and 3 drawers below that for SAE, another one for Metric and the 3rd will be pliers and whatnot. Plus I'll use the top of the 3rd one for my bench grinder and bench sander. Just have to wait about a week to 10 days for it to be shipped to the store.

Nice! Hopefully it doesn’t come damaged, I’ve had pretty good luck the last few times I had some larger stuff shipped to the store.

 

[Silverback]

Yeah, I hope so as well. I'm not in a huge hurry to get it so if it is damaged. I'll throw it through the front glass.

Last two I bought I used my old 81 Yota to bring home. The tailgate was like 24" off the ground. This will be brought home in the SD and the tailgate is tall.. getting it out I would love a Kabota like you have.

 

[Silverback]

I figure I'll have to bribe my neighbors with beer to get it out of the bed.

 

[Anathollo]

what model did you go with? I was wanting to pick up a second one so I can keep one set up for grinding and one for cutting.

I got this one. DEWALT Angle Grinder Tool, 4-1/2-Inch (DWE402W) - - Amazon.com

It came in yesterday but I've been so busy that I haven't even had time to take it out of the box yet

 

[Anathollo]

Picked these up to replace my wore out Kliens. The 10 and 12 gauge don't cut well anymore.

 

[Anathollo]

At Home Depot they have a buy a certain DeWalt tool and get a free 5A battery. So I took advantage of that and picked a router and circle sander up.
I had to go to two Home Depots to find these in stock.

 

[Silverback]

Replace your phone case ASAP.. I feel like I have been drinking more than I have looking at those pics.

 

[Anathollo]

Replace your phone case ASAP.. I feel like I have been drinking more than I have looking at those pics.

Replacement case is on the way

 

[Anathollo]

This is a pretty sweet little light for the price.

Milwaukee M12 ROVER 12-Volt Lithium-Ion Service and Repair 700 Lumens Flood Light with USB Charging-2367-20 - The Home Depot

 

[Silverback]

This guys videos are pretty awesome. Love his commentary. This is just one of them.

 

[PSU Taco85]

Picked up one of these Flextorq right angle attachments for the little battery impact.

FLEXTORQ® Modular Right-Angle System

Accomplish a variety of applications on the jobsite with one system. The Modular Right-Angle System transforms to quickly switch between a Compact Right Angle, Standard Right Angle, Right Angle Flexible Shaft, and Straight Flexible Shaft. It withstands the power of today's impact drivers with...

www.dewalt.com

Thing seems pretty useful and good quality, for $30 if it saves me once from a shit job where I wouldn't be able to get a drill into I'll be happy

 

[xJuice]

Picked up one of these Flextorq right angle attachments for the little battery impact.

FLEXTORQ® Modular Right-Angle System

Accomplish a variety of applications on the jobsite with one system. The Modular Right-Angle System transforms to quickly switch between a Compact Right Angle, Standard Right Angle, Right Angle Flexible Shaft, and Straight Flexible Shaft. It withstands the power of today's impact drivers with...

www.dewalt.com

Thing seems pretty useful and good quality, for $30 if it saves me once from a shit job where I wouldn't be able to get a drill into I'll be happy
View attachment 34233

View attachment 34234

View attachment 34235

You like that Bosch?
Was thinking of picking up the screwdriver version of it.

 

[PSU Taco85]

You like that Bosch?
Was thinking of picking up the screwdriver version of it.

So far so good, used it alot today to put the taco interior back together. I bought the 2 pack kit with the regular drill and impact gun. Only have had them for about a week now.

 

[Silverback]

My 44" US General box came in today. Went and picked it up. That was a PITA to unload alone. 327 lbs. Anyhow, I wanted to buy a couple side boxes as well... they won't arrive until middle of August!!

Anyhow, I do like the deeper drawers, enabled me to organized shit pretty well.

 

[Silverback]

Also picked up some new Wiha screwdrivers. Damn these things are nice... the bit end just feels perfect, precision machined.

 

[Anathollo]

Picked these up to replace my wore out Kliens. The 10 and 12 gauge don't cut well anymore. View attachment 34100

I've been using these at the house and like them so far other than the cutters. The cutters are soft metal and should only be used to cut copper wiring. I used them to snip some metal wire and it messed them up which is unacceptable IMO.

 

[PSU Taco85]

Bolted this on my Jet after seeing it sit on my work bench for the last few months