Tools!

[drew02a]

Or just get the same one off CL for $85:
http://sanantonio.craigslist.org/tls/2188421887.html

Dammit dude, you always post up the deals right at the wrong time, (except for that Lock Right)

I just bought one from Northern Tool Instead, because I like them better than Harbor Freight and It came with a load stabilizer thingy.

http://www.northerntool.com/shop/tools/product_200305213_200305213

 

[Mauzer]

Dammit dude, you always post up the deals right at the wrong time, (except for that Lock Right)

I just bought one from Northern Tool Instead, because I like them better than Harbor Freight and It came with a load stabilizer thingy.

http://www.northerntool.com/shop/tools/product_200305213_200305213

Lol, your just impatient my friend

 

[drew02a]

Lol, your just impatient my friend

Very True words

 

[yotarob]

You will like the fact that the Northern Toll one folds up.

 

[Silverback]

Dammit dude, you always post up the deals right at the wrong time, (except for that Lock Right)

I just bought one from Northern Tool Instead, because I like them better than Harbor Freight and It came with a load stabilizer thingy.

http://www.northerntool.com/shop/tools/product_200305213_200305213

I like that!

 

[TacoXpo]

I like that!

Yeah that balancing thing is great. I've used both and that thing is WAY better - so nice to be able to tilt with gravity instead of muscle!!!

 

[drew02a]

Okay, gonna order this one. Best cord I could find that uses 10GA conductors(3). Should definitely get 20A out of it. Also a plus that it has 3 plugs on the end and is 25'.

http://www.amazon.com/Power-First-4...1?s=lamps-light&ie=UTF8&qid=1296611397&sr=1-1

 

[yotarob]

Went to Lowe's last night to buy some little cutt-off wheels for my Dremel tool. All I could find where these new EZ lock wheels. Is ia a quick change type arbour. Paid almost $30 by the time I got out the door for an 11 piece kit that had the special arbour and 10 cut off wheels! What a rip off! You could buy 20 of the old single screw on for $5. I haven't used them yet but they had better be good for the price. Notice the green sticker on the box that says "$40 value"! For 10 cut off wheels?

 

[AlienXtx]

Looks like that little green sticker did it job nicely....

 

[Silverback]

Went to Lowe's last night to buy some little cutt-off wheels for my Dremel tool. All I could find where these new EZ lock wheels. Is ia a quick change type arbour. Paid almost $30 by the time I got out the door for an 11 piece kit that had the special arbour and 10 cut off wheels! What a rip off! You could buy 20 of the old single screw on for $5. I haven't used them yet but they had better be good for the price. Notice the green sticker on the box that says "$40 value"! For 10 cut off wheels?

Those things are pretty damn stout though. I used them to trim my AllPoo bumper... of course thats like saying that a hot knife cuts butter easy. But they are stronger than the other little demel wheels that screw on.

 

[SecretSquirrel]

You can get the old style ones in bulk from Harbor Freight, but they're not as good as the Dremel ones..

 

[yotarob]

Those things are pretty damn stout though. I used them to trim my AllPoo bumper... of course thats like saying that a hot knife cuts butter easy. But they are stronger than the other little demel wheels that screw on.

I hope so, you can but a 4-1/2" Dewalt cut-off wheel for the same price per wheel as these.

You can get the old style ones in bulk from Harbor Freight, but they're not as good as the Dremel ones..

I agree even the Dremel ones where not very good, but at least they where cheap as hell.

Not trying to complain too much about it, I was just a little shocked at the sudden change.

 

[TacoXpo]

Those things are pretty damn stout though. I used them to trim my AllPoo bumper... of course thats like saying that a hot knife cuts butter easy. But they are stronger than the other little demel wheels that screw on.

Did you arc your bumper to clear the flares? I did that to Brandon's and it worked out pretty nicely!

 

[Silverback]

Did you arc your bumper to clear the flares? I did that to Brandon's and it worked out pretty nicely!

I did.

 

[TacoXpo]

I did.

Nice!

 

[drew02a]

Will a 1250lb engine stand be strong enough to hold my 3.4L for about a month?

http://www.northerntool.com/shop/tools/product_200305217_200305217

 

[Silverback]

oh yeah!

 

[TacoXpo]

Will a 1250lb engine stand be strong enough to hold my 3.4L for about a month?

http://www.northerntool.com/shop/tools/product_200305217_200305217

I couldn't help but laugh! My brother had a fire breathing Road Runner (not his but same ride - 1968 383).

He built a 440 six pack with fender well headers and that thing sat on an engine stand next to the cow in the box (freezer that we would stuff with meat). It sat there for YEARS!

It was truly ashame that thing never got put into ANYTHING!!! My brother fell in love with a girl and moved away and I went to college. We both came home to visit one day and it was GONE!!! Probably picked up by someone that didn't know what it was.

I was about 13 when he first got it and I asked him if it would smoke the tires!? He flipped me the keys, I took it to the end of the block and SMOKED THE HELL out of that bitch!!! I could have killed myself!!! Nice living in a rural town with 1 cop and 52 square miles!

 

[AlienXtx]

Nice living in a rural town with 1 cop and 52 square miles!

Yes it is!

 

[Mauzer]

Fuck, headed to Harbor Freight on my lunch break to pick up an angle grinder and they closed the damn store! (Fredericksburg Rd for those in SA) They moved over to Vance Jackson but I didn't know that till I got back and looked it up...waste of my damn time