What have you done to your ride lately?

[Oswego]

Why do you need front brake lines?

They were a little tight when fully drooped and turned to one side. I'm sure I might be OK for a while with the stock ones, but the UCA gets a extra 1" drop and they are kinda tight so I don't wanna have any issues down the road if I keep stressing them.

 

[Silverback]

 

[taco4x4rar]

Mmmmmmmmm, big rubber

 

[Silverback]

Also picked up a 60" HiLift Extreme for the 4Runner. Didn't really need or want an Extreme, but I also didn't want a red one.

So if I get some time I'll try to put those tires on the beadlocks tonight. Fun Fun!

 

[taco4x4rar]

Also picked up a 60" HiLift Extreme for the 4Runner. Didn't really need or want an Extreme, but I also didn't want a red one.

So if I get some time I'll try to put those tires on the beadlocks tonight. Fun Fun!

Oh it's fun alright, like to have lost my mind putting mine on couldn't get the inner bead on to save my life even more fun was when I discovered I had pinhole leaks the welds on two of the rims after getting them mounted.

 

[Silverback]

Oh it's fun alright, like to have lost my mind putting mine on couldn't get the inner bead on to save my life even more fun was when I discovered I had pinhole leaks the welds on two of the rims after getting them mounted.

Well hopefully no pinholes since they already had tires on them.. but I did clean up some welds so who knows. I don't have a set of tire irons so I'm hoping that a couple long pry bars, some soapy water and my fat ass is all it takes.

 

[taco4x4rar]

Your's prolly isn't so bad, the big issue with mine was the the rockstomper locks actually add just a little under a 1/4" to the over all diameter of the outside lip made things very difficult.

 

[Silverback]

Your's prolly isn't so bad, the big issue with mine was the the rockstomper locks actually add just a little under a 1/4" to the over all diameter of the outside lip made things very difficult.

Yeah, I measured my standard 15" rims and the beadlocks... its not 1/4" more, but its really close to 1/4". I have a feeling a lot of 4 letter words will be part of my vocabulary during the install.

 

[yotarob]

Well hopefully no pinholes since they already had tires on them.. but I did clean up some welds so who knows. I don't have a set of tire irons so I'm hoping that a couple long pry bars, some soapy water and my fat ass is all it takes.

I would pay good money for a full lenght video of you mounting them.

 

[balakay]

I taught myself how to drive a stick.

 

[AlienXtx]

I taught myself how to drive a stick.

Now you need to teach Randy....

 

[SecretSquirrel]

Now you need to teach Randy....

(parking this here for Randy to use)
http://i.cdn.tacomaworld.com/host/tacomaworld/forum/images/smilies/extras/brianr.gif

 

[drew02a]

Bling Rims

 

[TacoXpo]

Bling Rims

I didn't realize they came in 24's?

 

[drew02a]

um, 305/70/16

 

[TacoXpo]

um, 305/70/16

Nice! and with that cab, IIRC you don't even have to cut the mount huh? Or am I wrong?

 

[drew02a]

Nice! and with that cab, IIRC you don't even have to cut the mount huh? Or am I wrong?

Definitely not, since I've got wheel spacers and a 4" lift. I don't think the cab has anything to do with it.

Now I just need some of that tire shine or whatever.

 

[SecretSquirrel]

Nice! and with that cab, IIRC you don't even have to cut the mount huh? Or am I wrong?

I'm running 305/70-16s on stock UCAs & have virgin body mounts...no marks at all.
I do rub the lca at full lock.

 

[SecretSquirrel]

So this is the route I'm thinking for my trip next summer... who wants to come with me?

http://tinyurl.com/25u9hfr

 

[TacoXpo]

So this is the route I'm thinking for my trip next summer... who wants to come with me?

http://tinyurl.com/25u9hfr

Very Cool!!! For that trip, I wish I was East Coast based! Be careful with the Dildos!! When it's wet back there, they're slippery buggers!!!