Turbo emblems are a popular mod with the Mexicans around here..

Here too.
I did get the propane kit today!!!
I need to trim is the bottom of the front diff housing - You can see here that it needs to be whacked so I don't have a chin waiting to be whacked!
this picture exaggerates the condition but the housing will be whacked so that these openings will have about and 1/8" edge distance.
Although the 'E.D' (not that E.D.! - Edge Distance) will be shy of what the designers had in mind, but between the 1/2" thick plate on the housing and the fact that the mating surface (the effective gasket area) is just as small, I feed good about whacking it!
Hoping to find later model hubs for the front so that I can use the Landcruiser discs! - The holes for the bolts on the discs are a couple of sizes too big and the later model hubs have larger bolts.