Just Guns

[garzanium]

Can someone who is running a Magpul MOE stock on their carbine extend it all the way and get the measurement from the butt to the receiver end plate?

11 1/4 " .
Is that a standard pistol tube? I need to get to 9 1/4" with the brace - so not sure which tube to get. If it turns out you need a longer tube, look at kak industies.

Sent from my SM-G900T using Tapatalk 2

 

[garzanium]

Also, put the arm strap back on the brace.. most folks are advising NOT to alter it, remove anything from the brace for compliance reasons

Sent from my SM-G900T using Tapatalk 2

 

[SamSter0077]

I shot a bunch of different pistols yesterday at the local firing range. Fell in love with the Beretta Px4 storm .40.... any opinions? I did shoot the Springfield XDM, nice but I liked the Beretta better.

 

[drew02a]

11 1/4 " .
Is that a standard pistol tube? I need to get to 9 1/4" with the brace - so not sure which tube to get. If it turns out you need a longer tube, look at kak industies.

Sent from my SM-G900T using Tapatalk 2

Thanks a ton!

This one is from KAK; Carbine Length Pistol Tube. This one also happens to be bigger than the reccomended thickness. So it's a super tight squeeze, but that's what I wanted.

 

[SecretSquirrel]

What length barrel is that?

So it's a super tight squeeze, but that's what I wanted.

Too easy

 

[drew02a]

10.5" barrel with YHM QD Compensator

 

[SecretSquirrel]

Thanks - I was going to do the 10.5 this week, but bought a laptop instead

 

[garzanium]

Sig brace is in. Got it with the promo free bag.. bag is nice.





Sent from my SM-G900T using Tapatalk 2

 

[drew02a]

Damn, wish I had found that deal!

 

[tx_shooter]

Picked up a nice little CHL pistol for well under retail yesterday. Only problem is now my wife is wanting it so she will have two.

 

[garzanium]

Damn, wish I had found that deal!

Im sure you had already ordered yours when the promo came up

Picked up a nice little CHL pistol for well under retail yesterday. Only problem is now my wife is wanting it so she will have two.

Hell ya! Going to the gunshow today to see what I find. Looking for a sw shield, sig, or something similar.

Academy no longer has ammo restrictions, besides 22. Got another 1k or so 9mm and about 500 223. I like that cheap tulaammo crap.
While the getting is good:beer:


Sent from my SM-G900T using Tapatalk 2

 

[tx_shooter]

I still prefer to carry my Sig 220 when I can; but this little Bersa is concealable with just a t-shirt while my 45 is not. I was really looking for a Sig 232 but this little shooter was too good of a deal to pass up.

 

[drew02a]

I spent some time in my garage (storage unit that is hot as hell) yesterday; putting together my AR so I could shoot it today. My Magpul MBUS II sights are supposed to arrive today. I'm hoping they get here before I leave for the range, but I'll test fire either way. Can't wait to get some rounds down range with this thing

 

[thekidcatcher]

Tell us how she shoots

 

[drew02a]

Great, it's a freaking tack driver... but the trigger isn't resetting right. I didn't build the lower either. It came factory new from New Frontier. Gonna have to do some trouble "shooting", .

 

[thekidcatcher]

hmm that's interesting. Can you explain how its failing?

 

[drew02a]

hmm that's interesting. Can you explain how its failing?

Pull the trigger and the 1st round goes off
2nd round gets loaded
Pull the trigger again, but it's not set
Pull the Charging handle
2nd round ejects and 3rd round goes into chamber
Pull trigger and bang like normal

afterward, inspection of 2nd round revealed a small dimple on the primer

Repeated about 10 times with the same result

 

[Silverback]

Picked up a nice little CHL pistol for well under retail yesterday. Only problem is now my wife is wanting it so she will have two.

Duel wielding FTW!!

 

[tx_shooter]

I'll have her try that out and let you know how it turns out.

 

[Silverback]

We'll need pics.