Just Guns
- Thread starter BirdTRD
- Start date
Silverback
Lima Gulf Bravo Foxtrot Juliet Bravo
I love my 10mm XDM.
Silverback
Lima Gulf Bravo Foxtrot Juliet Bravo
My 10 year old has shot it... not bad.. you could handle it. 
balakay
BabyMax
Maybe @fsbrain03 neighbor can do a group buy?
Same reloading die as 40 S&W. My f-in-law wants to buy the dies for my Dillon.
Hey all you cool cats and kittens, here's the Hellcat in stock.
Springfield Armory Hellcat 9mm Micro Compact Optics Ready 13+1 HC9319BOSP
I don't know if this is the cheapest price and I don't care. Research that yourself. Don't @ me if you find it 10 cents cheaper elsewhere.
Springfield Armory Hellcat 9mm Micro Compact Optics Ready 13+1 HC9319BOSP
I don't know if this is the cheapest price and I don't care. Research that yourself. Don't @ me if you find it 10 cents cheaper elsewhere.
balakay
BabyMax
Hey all you cool cats and kittens, here's the Hellcat in stock.
Springfield Armory Hellcat 9mm Micro Compact Optics Ready 13+1 HC9319BOSP
I don't know if this is the cheapest price and I don't care. Research that yourself. Don't @ me if you find it 10 cents cheaper elsewhere.
Best price I've seen for the OSP.
Installed my SLR magwell on my G19. Had to shave down my backstrap a bit to get it to fit. Didn't take a pic of it.
Also installed a new JP Enterprises 9.25" MLOK Handguard on my 10.5" barrel. I wanted a stiffer handguard and a top pic rail. The built in texture on the rail is amazing. This handguard also mounts through a pretty secure system. Can't wait to put it through its paces.
This will eventually be my night vision upper as well. I want to take a night vision class in the future and rent their equipment to see what I like and don't like since night vision stuff is so damn expensive.
Also installed a Dead Air Flash Hider over a muzzle brake just in case I run unsuppressed at night. Waited for 8 months for these to be back in stock.
I have some other parts on the way as well and am waiting for the modlight button to get back in stock. I'm also gonna buy the new Trijicon MRO HD for my bday in a bit.
Also installed a new JP Enterprises 9.25" MLOK Handguard on my 10.5" barrel. I wanted a stiffer handguard and a top pic rail. The built in texture on the rail is amazing. This handguard also mounts through a pretty secure system. Can't wait to put it through its paces.
This will eventually be my night vision upper as well. I want to take a night vision class in the future and rent their equipment to see what I like and don't like since night vision stuff is so damn expensive.
Also installed a Dead Air Flash Hider over a muzzle brake just in case I run unsuppressed at night. Waited for 8 months for these to be back in stock.
I have some other parts on the way as well and am waiting for the modlight button to get back in stock. I'm also gonna buy the new Trijicon MRO HD for my bday in a bit.
Taco Loco
Tired and Lazy, married to ‘The Laundry Fairy’
Nice.
Taco Loco
Tired and Lazy, married to ‘The Laundry Fairy’
Sweet. Can’t even see the 12lb test line, it’s invisible or something!!
Oh it's there all right. The added texture helps it grip the ocean floor!
Silverback
Lima Gulf Bravo Foxtrot Juliet Bravo
damn it.. called up the LGS to see when that 10/22 take-down would arrive. She said, it just came in the door. I asked "its the heavy barrel right? You said it was threaded for a suppressor". She gives me the part number. Nope. They have a thin barrel that's also threaded. Not the right one. Good news is they can get it. I'll go pay for it tomorrow and it will take a week or 2 to come in. Oh well. Give me time to research triggers a little more.
Gun arrived. Swapped out the stock, added the Tac Sol flash hider and the Magpul optics mount. RedDot will be here tomorrow. I picked up 6 extra 10 rnd magazines for it. Didn't buy the 15 or 25 ones. Although I probably will go buy a couple 15's. For as big as they are only hold 5 more rnds. But they are a shitload easier to drop in and out. I found a place that sells "bumpers" that mount on the bottom of the 10 rnd mag and allow you to grab them easier but then they won't fit in the end stock storage compartment. Right now they are very tight in the magwell and a bitch to drop out. We'll see after a few rounds through it. I have not installed the Volquartsen bolt release plate or the Tac Sol extended mag release, I am still looking at triggers. Leaning towards the Ruger BX (best bang for the buck) but there are a lot of cool triggers to chose from. Just need to decide how much I want to spend. Might call LGS tomorrow and see if they have one in stock. Oh and sling mounts and sling arrive this weekend. So no ugly holes in the stock.
Oswego
n00b
Think I went with the Volquartsen trigger, but can't remember nor tell you if it was nice, because I never installed it (story of my life).
Good news is - if I'm ever bored Ive got years worth of parts stockpiled for just about every hobby I have. Think paintballing is the only hobby I have kept up on 100% and everything I bought is installed, tweaked, and ready to go at a moments notice So ass backwards
Good news is - if I'm ever bored Ive got years worth of parts stockpiled for just about every hobby I have. Think paintballing is the only hobby I have kept up on 100% and everything I bought is installed, tweaked, and ready to go at a moments notice
So ass backwards
Oswego
n00b
True
if my buddy could of gotten air during the pandemic shut down we would of gone out to a friends property for a couple games, but alas no air. It's not like anyone would want to be close to anyone else. Only thing touching would be paint at 300fps
I fill both my tanks everytime I play so Ive still got one at 4500psi and one at 4kpsi but both mine are super low pressure @ 250 and he needs high pressure @ 800 for his tippmans
if my buddy could of gotten air during the pandemic shut down we would of gone out to a friends property for a couple games, but alas no air. It's not like anyone would want to be close to anyone else. Only thing touching would be paint at 300fps
I fill both my tanks everytime I play so Ive still got one at 4500psi and one at 4kpsi but both mine are super low pressure @ 250 and he needs high pressure @ 800 for his tippmans
AlienXtx
Nignog
I got a full CO2 tank at the house so I can fill my own, but kids have totally lost interestTrue
if my buddy could of gotten air during the pandemic shut down we would of gone out to a friends property for a couple games, but alas no air. It's not like anyone would want to be close to anyone else. Only thing touching would be paint at 300fps
I fill both my tanks everytime I play so Ive still got one at 4500psi and one at 4kpsi but both mine are super low pressure @ 250 and he needs high pressure @ 800 for his tippmans
CowboyTaco
Well-Known Member
Shoot them with paintballs until they decide to start shooting back?
Something tells me they will get interested in a hurry.