Just Guns

[Anathollo]

Found some Unobtanium! Great company to deal with!

 

[Silverback]

My neighbor just order a DD 300BO AR with integral suppressed barrel... it will be 9-12 months before he can get it I'm sure. I told him to start shopping for ammo now. Nice score.

 

[tx_shooter]

Finally had a minute to get my JP Full Mass BCG setup.View attachment 27377

Still debating ordering one of those rollers.

 

[Anathollo]

Still debating ordering one of those rollers.

I'm still "testing" them. I love the theory and the history behind it but still not a 100% certain it's worth it.

On my Mil-spec DPMS bolt, it doesn't make a difference because of the shitty finish on the bolt. So everything feels grimy when you pull the charging handle back, including the cam pin.
On my JP bolts with their high-end slick finish, it makes a difference because the cam pin is the only thing left dragging on the upper receiver. Now that the roller cam pin is installed, it doesn't feel like anything drags at all.

 

[Anathollo]

Good info on German made vs. American made Sigs

 

[Silverback]

Well this is good news for our Morning Glory member.

9th Circuit ends California ban on high-capacity magazines

 

[Oswego]

Hope it goes to the supreme court so it can help NY/NJ as well, but I doubt they would have the balls to hear the case and actually do their job. Only thing I do not like about our supreme courts is them deciding to hear what cases they want to hear. They have too much power in that regard IMHO.

 

[Taco Loco]

 

[Anathollo]

Took out my Giessele SSP trigger and put in my older JP Roller trigger with a 90° safety in my backpack pistol lower. The Giessele is just nowhere near as good as the JP Roller. Only way to really explain it is to compare them side by side.

Installed my new JP drop in roller trigger with a Radian 45° safety into my competition lower.

 

[Anathollo]

Got my knife back from Benchmade right before the storm. It's better than when I bought it new. Opens like it's on ball bearings now and the knife has the right edge again (Benchmade sharpening contractor at the NRA shotshow fucked up the edge of my knife).

 

[CowboyTaco]

Got my knife back from Benchmade right before the storm. It's better than when I bought it new. Opens like it's on ball bearings now and the knife has the right edge again (Benchmade sharpening contractor at the NRA shotshow fucked up the edge of my knife).
View attachment 28062

This guy brings a knife to a gun thread.

 

[Anathollo]

This guy brings a knife to a gun thread.

 

[AlienXtx]

This guy brings a knife to a gun thread.

I at someone else sharpening his knife, and then fucking it up. Sharpening your own knife is manhood 101.

 

[Silverback]

Meh, I paid to get mine sharpened one time at a Bass Pro in Springfield MO. Thankfully they did not fuck it up.

 

[Anathollo]

I at someone else sharpening his knife, and then fucking it up. Sharpening your own knife is manhood 101.

It was free at the NRA shot show and I could come back to pick it up later while walking around and looking at booths. Figured why not since it was at Benchmade's booth (I was not aware that it was a subcontractor that was sharpening the knives and not an actual Benchmade employee).

When you ship it off to Benchmade, they go through the whole knife and replace wear parts as well as sharpen the blade. I've daily carried this knife for 5 years now so I figured it was time to replace some of those wear items. I paid $3 to ship it to them, they do the work for free and ship it back for free.

 

[Anathollo]

OOOoooo suwheet!

 

[Silverback]

That is nice!

 

[Anathollo]

OOOoooo suwheet!
View attachment 28211

Well that was a swing and a miss dammit. We now have the details.

 

[Silverback]

Oh yeah, big fail.

 

[Anathollo]

Mounted my spare Holosun on a T-Rex arms mount and installed it on my 16" .223 upper.