Something is up with this combo. Had the trigger set and it worked good for a day. Past few days Ive missed more than a couple shots due to malfunction (failure to fire). Adjusted the trigger to be less sensitive so it's working with every pull and same issues creep up where the marker will not fire......just hissing air.
Could be a litany of things - so Ill look into it later. First thing I'm going to do is switch tanks to my medium psi regulator thats set to 600psi. Thinking my super low pressure tank reg set to 250 psi may be impeding the new fire control valve. If thats the issue the new valve is being sold and Ill tweak the new trigger - I like to run my markers at the lowest psi I can. Not going to run higher pressure and put more strain on the drivetrain just for reduced trigger creep that I can set manually with the adj trigger itself.
I'm also running this marker unlike most people I'm sure. It sits outside during the day and may get fired 0 times a day or 50 times a day. Sometimes it gets pressured up as a shot may open up and more times than not the shot doesn't pan out so it gets depressurized w/o a shot ever being fired. This can happen a few times a day so it may be messing with the valve. Pretty sure most people pressure up - shoot a bunch till the games over - then depressurize. I'm pressurizing/de-pressuring.........then repeating
