The Home Improvement Thread

Oswego

n00b
Finally not the ugliest house on the block.


Further I dig more pissed I get. Who the F hangs siding with no tar paper behind it??? The morons who sided this house.
20211215_122127.jpg


Someone took the time to demo all the asbestos below 4' but then didnt even put up anything but siding/foam insulation.

20211215_162535.jpg
 

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
Are you going build a front patio/porch area or just steps?

And yeah, your new siding looks 10x better.
 

Oswego

n00b
To 'make it work' with existing conditions & code it needs 3 steps + a 50" deep landing.

Here's what I submitted and the head guy marked up. I still need to call him so I can figure out how the bottom step is going to be supported since he deleted those piers.


20211215_181022.jpg
 

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
Says not required... but does that mean not allowed? I would think it would be a good idea to have unless you are landing on the sidewalk which it looks like you are not.
 

Oswego

n00b
Says not required... but does that mean not allowed? I would think it would be a good idea to have unless you are landing on the sidewalk which it looks like you are not.
Who knows but my handrail also needs to be secured so I'll most likely stick to my initial plans.

Also seems funny to:

* leave my piers 6" above the frost line
*expand to tubeless/rebar free 10" holes with no bottom pad

I followed latest IBC codes and based off local university ground temps then determined the depth and size. who knows what my town is working off of.
 

Oswego

n00b
For any of you stock guys..... fuck off of lumber futures lol

 

Anathollo

Armorall is my choice of lube
Staff member
Says not required... but does that mean not allowed? I would think it would be a good idea to have unless you are landing on the sidewalk which it looks like you are not.
No you can still put it in, it's just up to @Oswego if he wants to spend the money to put that pier in.

@Oswego it's the bottom step, you could just put it on some CMU flat block and call it a day. This isn't your forever house so it won't be your problem in a few years...
 

Oswego

n00b
No you can still put it in, it's just up to @Oswego if he wants to spend the money to put that pier in.

@Oswego it's the bottom step, you could just put it on some CMU flat block and call it a day. This isn't your forever house so it won't be your problem in a few years...

I was thinking of pouring a rat slab but that makes sense.

Only issues going to be a looser handrail and the fact I know I'm half assing it. So far I can be pretty proud of my work.

Sence of accomplishment and pride is 90% of my motivation at this point

I know you know what I mean....
 
Last edited:

Anathollo

Armorall is my choice of lube
Staff member
I was thinking of pouring a rat slab but that makes sense.

Only issues going to be a looser handrail and the fact I know I'm half assing it. So far I can be pretty proud of my work.

Sence of accomplishment and pride is 90% of my motivation at this point

I know you know what I mean....
Yes I do.
 

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
My buddy had a new (bought it at the end of 2019) Samsung fridge and his ice maker sucked as well. So much so that he ended up buying a stand-alone ice maker,

All the appliances in the kitchen are GE Cafe series. No issues and 8 years old.

Fuck me running.. fridge took a shit tonight. A replacement is $3600 or so and it's not the same. Quickest to come look at is on Monday. We have taken everything out and either trashed or put in another fridge. Just fucking junk. Mom had a fridge in the garage that was older than I am. Replaced it because she got tired of kicking the brick the was keeping the door closed. I'm just glad it took a shit while we are here and not next week while I am not.
 

AlienXtx

Nignog
That shit sucks
 

Oswego

n00b
A $3,600 fridge should come with a Nascar service pit crew on call 24/7/365.

Show up before you hang up the phone and have it fixed in 11 seconds

Good luck man. I've been extremely lucky and never had one die on me. I am however on my 3rd washer/dryer in 2 decades
 

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
Every other fridge that was under $3600 is out of stock or on backorder! Did see an LG that I could get in about a month.
 

Anathollo

Armorall is my choice of lube
Staff member
Every other fridge that was under $3600 is out of stock or on backorder! Did see an LG that I could get in about a month.
Do not get an LG. Junk fridges. My mom's LG fridges compressor went out after 3 years. Try to find a fridge that's not made by GE (or a company under their umbrella).

If you have to wait for a good fridge, then go buy a cheap standard fridge for cheap off fakebook marketplace and just wait it out.

Or go buy a super fancy Sub-Zero fridge ;)
 

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
I really hope I can just get this one fixed.
 

PSU Taco85

Well-Known Member
Fuck me running.. fridge took a shit tonight. A replacement is $3600 or so and it's not the same. Quickest to come look at is on Monday. We have taken everything out and either trashed or put in another fridge. Just fucking junk. Mom had a fridge in the garage that was older than I am. Replaced it because she got tired of kicking the brick the was keeping the door closed. I'm just glad it took a shit while we are here and not next week while I am not.

you jinxed yourself! You know what they say GE stands for, "good enough". $3600 holy crap, you could just buy a tool shed, insulate it, and put an industrial condenser in there and have a walk in fridge for probably less than the cost of the GE unit. My neighbor did that for his deer, rented out a spot to others so they had a place to keep the deer before butchering.
 

PSU Taco85

Well-Known Member
I really hope I can just get this one fixed.

It's probably something stupid like a control card or molex plug that went bad. I'm sure the compressor itself is fine and has a good charge. These new fridges are too complicated, like anything else they take what works and add crap to it that nobody needs. Who needs a TV or be able to see inside your fridge from your phone when you're not home? Lazy stupid motherfuckers, that's who lol
 

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
It's probably something stupid like a control card or molex plug that went bad. I'm sure the compressor itself is fine and has a good charge. These new fridges are too complicated, like anything else they take what works and add crap to it that nobody needs. Who needs a TV or be able to see inside your fridge from your phone when you're not home? Lazy stupid motherfuckers, that's who lol

I noticed a lot of ice had built up at the lip of the ice maker. I wonder if something was spraying water and it leaked into the door. I was hoping it would dry out and turn back on this morning. No luck.
 

PSU Taco85

Well-Known Member
I noticed a lot of ice had built up at the lip of the ice maker. I wonder if something was spraying water and it leaked into the door. I was hoping it would dry out and turn back on this morning. No luck.

Yeah perhaps there is a defrost circuit to keep that from happening that went bad, then the water caused a control module to short out.
 
Top