TacoXpo
HOAX DENIER
One of these days I'll post up what kills mine.hauling trailers and stopping is what burns mine out
One of these days I'll post up what kills mine.hauling trailers and stopping is what burns mine out
One of these days I'll post up what kills mine.![]()
I made a set of brackets that utilize existing seat and seatbelt holes.Yep. The slide will be mounted in the cargo area. I'm not willing to drill holes through my floor to bolt it in like a lot of people seem to be planning to do. So my plan is to cut a piece of 3/4" MDF that will fit the cargo area and use carriage bolts coming up from the bottom to mount the slide to the MDF. If necessary (and probably even if not) I'll have a way to tie the MDF into the stock tie down points so I don't have to worry about it trying to flip forward when I have the fridge slid all the way out. Then I'll use roll on bedliner on the wood so it doesn't stand out so bad and won't let stuff slide around when loaded. That's this weekend's project. Along with getting power ran back to it.
I made a set of brackets that utilize existing seat and seatbelt holes.
And considering it will most likely have beer in it - I would not anchor it within arms reach of the front seats.
Has anyone heard of LEO/State Troopers asking to see the Proof of Inspection papers? I was told by a county clerk to keep it in the truck because they are asking for them. The fact you have the tag does not mean you do not have to have the proof of inspection. It is a Catch 22 that is making them ticket money.
and a 17mm to remove the caliper
Loctite never hurt.
and a 17mm to remove the caliper
And considering it will most likely have beer in it - I would not anchor it within arms reach of the front seats.
Has anyone heard of LEO/State Troopers asking to see the Proof of Inspection papers? I was told by a county clerk to keep it in the truck because they are asking for them. The fact you have the tag does not mean you do not have to have the proof of inspection. It is a Catch 22 that is making them ticket money.
I have to heat up and clean the loctite off of my boltsI make sure to loctite em everytime.
and a 17mm to remove the caliper
I just chase with a tap and die from time-to-time. My spindles were pretty gunked up.I like Loctite® since I don't live in 'Jersey.
Does putting in weather techs count as anything?
on Tardworld, it's a mod.