What have you done to your ride lately?

[CowboyTaco]

I bought the Husky liners for the Expedition and the middle row is a hair short. I doesn't go all the way to the edge on one side and gets caught on the seat when it slides forward as a result. There are also a lot of sharp points sticking up. I may contact them and see about a warranty replacement.

The Husky liners fit our 4Runner awesome.

 

[AlienXtx]

Box one of two just showed up...

 

[tx_shooter]

That is not going on a 4 cylinder

 

[AlienXtx]

That is not going on a 4 cylinder

Nope.....I dont own any 4 cylinders though

 

[Oswego]

good ol Canadian steel...

 

[AlienXtx]

Like 'berta beef

 

[AlienXtx]

Second boxed showed up

 

[AlienXtx]

Finally got around to getting the delivered items out of the boxes and onto my truck today. Craziest thing happened when I lifted it up, damn factory exhaust fell right off.

So I just replaced it with this....

Made use of my Superdutys lil helper too

So I could reach the egr cooler and install a block off plate.

And wire in this.......

 

[tx_shooter]

So was the results worth the work? Get an extra 500 horses and 50 mpg?

 

[AlienXtx]

So was the results worth the work? Get an extra 500 horses and 50 mpg?

210 hp on #5. I had it set on #1 = +30hp and was getting around 21 mpg @70 coming home. I'm sure that would go up on road trips too. It also firmed up the trans shifts, but I need to drive it 100-150 miles to let the trans set up. The exhaust sounds decent, not to loud at all while crusin. No more DEF fluid and I lost about 150# in weight.

 

[Silverback]

So what are the torque gains? No don't tell.. yes please tell me. Fuck.. ok, tell me.

 

[AlienXtx]

So what are the torque gains? No don't tell.. yes please tell me. Fuck.. ok, tell me.

Actually it doesn't list the TQ which is strange I guess, but the guys writting these tunes probably sell 90% of their stuff to guys that don't care about TQ and are running the "smoke" tunes so the can "roll coal" .

Here is what I have loaded currently, but there are at least 30 different tunes I can choose from. I paid an extra $100 so that I could keep access to all the tunes and not just pick one and be stuck with it after a month.

 

[Anathollo]

Actually it doesn't list the TQ which is strange I guess, but the guys writting these tunes probably sell 90% of their stuff to guys that don't care about TQ and are running the "smoke" tunes so the can "roll coal" .

Here is what I have loaded currently, but there are at least 30 different tunes I can choose from. I paid an extra $100 so that I could keep access to all the tunes and not just pick one and be stuck with it after a month.
View attachment 30354

Just make sure you keep the stock exhaust in case you sell the truck. My buddies BIL tried to trade in his deleted F250 and the dealer denied it bc the truck was deleted. He also threw away his stock exhaust so he was fucked there too.

But I'm all for deleting that crap. Glad you got rid of that shit system.

 

[AlienXtx]

Oh I got it and all the brackets etc. I also put plastic bags over all the open connections and strapped them up out of the way.

 

[CowboyTaco]

Finally got around to permanently mounting the switch for my front LED pods.

Up is low and down is high output.

 

[Silverback]

Which pods did you get? Link to the button?

 

[CowboyTaco]

They are the Ridgid ones that I got on BF sale like 3 or 4 years ago. The button is the one that came with them and has just been hanging out in the little pull down tray to the lower left or wedged between the dash and steering wheel. It sucked if I needed to get to it quickly.

 

[Silverback]

I have 2 sets of Rigid pods I need to mount on the Tacos rack but I need a 3 way switch, each pod has 2 modes. I am guessing they are similar pods to what you have.
Rigid Industries LED Pod with Amber Backlight Radiance RIGID Industries

 

[CowboyTaco]

Different LED config, but probably the same internal setup. Mine came with the harness. I guess yours did not?

I just googled 3-way switch and this is one of the first ones that came up. Something like this should do what you need (and look better than what I have): PRASA1-16F-BB000 : Alcoswitch Rocker Switches | TE Connectivity

 

[CowboyTaco]

Something like this might even fit into a spare slot: https://www.amazon.com/Bandc-Marine...s=3+position+switch+12v&qid=1605727645&sr=8-9

Probably not, but you could probably find one that does.