What have you done to your ride lately?

Taco Loco

Tired and Lazy, married to ‘The Laundry Fairy’
Do you have some shelter for Orange?
20210810_134844.jpg
 

MatthewMay1

amateur professional
Your gonna have to look in your book, mine is more frequent than what the Kubota intervals recommend, it's all based how you use your machine, the environment it is in and the type attachments used on it.

Depends on what trans you have as well, the HST has it's own oil change intervals compared to if you have a typical clutch setup. From what I remember when I changed mine after break in, the HST had two filters as well, one for the hydraulics and maybe a finer one for the transmission even though the fluid is common between the two. If you use alot of hydraulic implements you probably should service more often vs. just using the PTO connections.
I’ll need to dig out the book and see what it says. Last service was 200 hours and I don’t even remember what fluids I changed at that time. I think it has 250 hours now….or so. It gets only about 3-5 hours of use a week
 

Taco Loco

Tired and Lazy, married to ‘The Laundry Fairy’
I’ll need to dig out the book and see what it says. Last service was 200 hours and I don’t even remember what fluids I changed at that time. I think it has 250 hours now….or so. It gets only about 3-5 hours of use a week

Download the Candian PDF version for your year and model, save it to phone.
 

PSU Taco85

Well-Known Member
Download the Candian PDF version for your year and model, save it to phone.

why Canadian? I got the paper manuals when I purchased but downloaded a digital copy for free here

 

Taco Loco

Tired and Lazy, married to ‘The Laundry Fairy’
why Canadian? I got the paper manuals when I purchased but downloaded a digital copy for free here


Well, ok, but mine is not listed, the operator manual yes, the service manual No, Canada ehh? it is.
 

Taco Loco

Tired and Lazy, married to ‘The Laundry Fairy’
You want the one that does the breakdown of the component's/parts, the ones used at the dealer.
 

Taco Loco

Tired and Lazy, married to ‘The Laundry Fairy’
got a link to canadia manuals?

I'm at the farm, I will be back probably Sunday, not sure if I have a link or not, but I will check, IIRC I got it from a looney tractor forum. Look for workshop manuals, the machines are group together by similar models and many times seperate engine manuals.
 
Last edited:

TacoXpo

HOAX DENIER
Getting ready to put new housing in. I think I got a full life out of the housing. Low milage but high fun factor. I'm hoping the new housing will last longer than the 40k miles I got from this one! lol Notice the wear from my current camber "settings." lol
20210811_185359.jpg
 

PSU Taco85

Well-Known Member
I'm at the farm, I will be back probably Sunday, not sure if I have a link or not, but I will check, IIRC I got it from a looney tractor forum. Look for workshop manuals, the machines are group together by similar models and many times seperate engine manuals.

i was able to leave one on my google drive and phone memory as well, seems like it’ll serve me well in case shit hits the fan lol
33D6B2A6-DBDC-446D-A14B-FCAB4CA5D141.png
 

tx_shooter

It is not a war crime the first time.
Staff member
Getting ready to put new housing in. I think I got a full life out of the housing. Low milage but high fun factor. I'm hoping the new housing will last longer than the 40k miles I got from this one! lol Notice the wear from my current camber "settings." lolView attachment 36960

I am impressed the bearings have not blown out before now. What axle are you going with? Please say portals F/R.
 

Taco Loco

Tired and Lazy, married to ‘The Laundry Fairy’
i was able to leave one on my google drive and phone memory as well, seems like it’ll serve me well in case shit hits the fan lol
View attachment 36961

Good deal, does that one cover the engine as well? If not look there will be another one just for engines.
 

CowboyTaco

Well-Known Member
Cost me $7.91 to ship the bad Cardone CV axle back to RockAuto. They took care of shipping the new one to me. I purchased the return shipping label through them and they must have shipped the replacement as soon as they had tracking information because I got the replacement 2 days later.

Shipped the old out on Monday and had a replacement axle by mid-day Wednesday.
 

Anathollo

Armorall is my choice of lube
Staff member
I guess this is my new ride now since I daily it. Well my/our/my wife's S60 has the 2015.5 oil burning issue where the piston rings are too short and allow oil to bypass. They eventually fail and the dealership has to replace the piston rings or replace the entire motor (if the cylinder walls are scratched). Volvo fixed this issue by the 2016 model with a new piston head and ring design.

So they have my parts on order for new piston rings and I take the car in for service in a couple of months (parts are delayed and the dealership is moving to a new location). So far, the dealership has been taking care of us really well, so I'm happy and I guess we'll have a rebuilt motor at 80k miles.

But I do have to learn how to re-drive now. In order to determine how much oil the car is burning to be covered under the service bulletin, Volvo changes your oil and has you come back in 1,250 miles to do another oil change where they test to see how much oil you've burned (all of this is covered for free). So lets just say my right foot has had two bricks tied to it for the past 1,250 miles with the A/C on low to make sure I met the bulletin requirements lol
 

AlienXtx

Nignog
Just got it today, so I've only put rain x on the windows, removed the 4x4 decal and swapped all my work shit over to it. Selling the F150. This new one is a 250 with the new 7.3 gas. Other then the gas, 10-speed and short bed it's literally a 2022 version of my old 2017.
20210824_120642.jpg
20210824_120619.jpg
 

Anathollo

Armorall is my choice of lube
Staff member
Just got it today, so I've only put rain x on the windows, removed the 4x4 decal and swapped all my work shit over to it. Selling the F150. This new one is a 250 with the new 7.3 gas. Other then the gas, 10-speed and short bed it's literally a 2022 version of my old 2017.View attachment 37364View attachment 37365
Nice! Why'd you take off the 4x4 decals?
 

AlienXtx

Nignog
Because they look stupid and I don't care if anyone else knows it's 4x4 lol
 
Top