What have you done to your ride lately?

Silverback

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
BearsFan07 said:
Bud Built used to make an adapter plate for a York to mount to a 22R(E).. but he stopped production. I want one.
Click to expand...

drew02a said:
That sounds awesome. Why the hell would he stop?
Click to expand...

TacoXpo said:
I'm getting ready to leave to go camping (otherwise I would do the search) but there's a number of plans on how to weld it up... Alternatively, I bet Bud would still make one for a good customer! :D
Click to expand...

http://www.yotatech.com/f129/york-board-air-fitted-22re-163697/
 
jdmcq

jdmcq

Will pay to see Cmack get tased
Changed the oil, drained and filled the transmission, rotated the tires, fixed the leaf spring squeek (Front spring perches) and found that one of the mount bolts is frozen in the spring eye...again.
 
MCTacodriver

MCTacodriver

Diarrhea: A natural lubricant
Got the coilovers changed to the new to me OME 884s and nitro 9000s today, got it all done in an hour. Was a lot easier than I thought it was going to be. Come monday I'll start work on my stereo setup. Gotta have some good sounding tunes for the 24 hours ill be spending in my truck! Looks like the sliders for my Tacoma will be riding in the bed til I get home. I don't know of any good welders within an hour of me except the guy at the autohobby shop on base, but they aren't allowed to weld to the frame...Will probably just go over to Krawltex.
 
Oury

Oury

Texas Taco
MCTacodriver said:
Got the coilovers changed to the new to me OME 884s and nitro 9000s today, got it all done in an hour. Was a lot easier than I thought it was going to be. Come monday I'll start work on my stereo setup. Gotta have some good sounding tunes for the 24 hours ill be spending in my truck! Looks like the sliders for my Tacoma will be riding in the bed til I get home. I don't know of any good welders within an hour of me except the guy at the autohobby shop on base, but they aren't allowed to weld to the frame...Will probably just go over to Krawltex.
Click to expand...

It cost me $320 for the Slider Install I did with them about a month or so ago, just fyi... $80/hr
 
AlienXtx

AlienXtx

Nignog
Pulled my third yesterday and replaced the springs.
IMAG0660.jpg

While I was waiting for Drew I pulled and cleaned my catch cans. Hard to believe how much blow by this thing catches.
IMAG0658.jpg

Also did my 15k oil change twice (never climb out from under truck before you reinstall the oil plug)
IMAG0657.jpg

IMAG0661.jpg
 
MCTacodriver

MCTacodriver

Diarrhea: A natural lubricant
Oury said:
It cost me $320 for the Slider Install I did with them about a month or so ago, just fyi... $80/hr
Click to expand...

Jeez! If only I could get it done at the autohobby shop here, it would cost me $40! I am actually about to go get my exhaust rerouted for a total of $20 plus parts...

Anyone with a welder feel like making $150+brew? Haha
 
drew02a

drew02a

Moderator
Staff member
MCTacodriver said:
Jeez! If only I could get it done at the autohobby shop here, it would cost me $40! I am actually about to go get my exhaust rerouted for a total of $20 plus parts...

Anyone with a welder feel like making $150+brew? Haha
Click to expand...

Forget the $150. Just come down to San Antonio with a case of Lonestar Light, and we'll get 'em welded on.
 
MCTacodriver

MCTacodriver

Diarrhea: A natural lubricant
Thanks Drew, I'll be rolling into Austin on the 6th, so anytime that is good for you after that I can get down there. Let me know whenever it'll be good for you.
 
MCTacodriver

MCTacodriver

Diarrhea: A natural lubricant
The 8th will work, it'd be nice to have them for the meet on the 11th. Wouldn't want to come down on a rock and pull a Larry :shifty:
 
MCTacodriver

MCTacodriver

Diarrhea: A natural lubricant
Just starting to work on putting my amp and speakers in, wish I could have gotten started earlier in the day but I ended up helping a friend move. Now the sun is setting and I am tearing into a project I have only the slightest clue what to do. Only one way to learn, right?


Edit: Definitely way to dark to be starting something like this. I got the power wire for the amp ran and am now having to call it quits. Damn I need to get married so I can get out of the barracks and into a house with a garage!
 
Last edited:
TacoXpo

TacoXpo

HOAX DENIER
taco4x4rar

taco4x4rar

Well-Known Member
drew02a said:
Today I removed the cover off of the front diff so I could use a chisel to punch out the stupid little half shaft. I also noticed that the straight shaft I got from rob is missing the Bolts that attach it to the CV axle. Gonna be a pain in the ass to press them off of the ADD one and into the straight one.
Click to expand...

Rob said not to use the studs. Said just plain bolts worked much better.
 
AlienXtx

AlienXtx

Nignog
Makes it much easier to to a trail fix.
 
You must log in or register to reply here.
Top