What have you done to your ride lately?

[Anathollo]

Pulled my CV axle to swap out the boots. I then proceeded to snap my pullers trying to get the head off so I have to wait until tomorrow to go buy some new ones. I don't get it, my driverside came off with barely any effort.

Also, I need to order new cam bolts as mine have seized and I cannot get the LCA off.

EDIT: Parts are ordered.

 

[Anathollo]

Hotboxing my CV axle so the RTV will dry faster.

Replaced the inner wheel seal and outer wheel seal on my passenger CV axle. Also cleaned and decreased my UCA.

 

[05tacoSPORT]

Replacing another wheel bearing

 

[TacoXpo]

Hotboxing my CV axle so the RTV will dry faster.

Replaced the inner wheel seal and outer wheel seal on my passenger CV axle. Also cleaned and decreased my UCA.

not exactly what comes to mind when you say hot boxing.

 

[Silverback]

lmao. I was thinking the same thing.

Dutch oven comes to mind.

 

[tx_shooter]

Glad I was not the only one kind of confused by the mismatch.

 

[tx_shooter]

I picked up my hub spacers and managed to clean out enough of a space to park my rig in my garage. Hopefully this week of bad weather will give me enough time to get some progress done on it.

 

[TacoXpo]

lmao. I was thinking the same thing.

Dutch oven comes to mind.

 

[Silverback]

BTW.. my wife gets REALLY violent if I try a hot box/dutch oven.. To the tune that IF I want to pull that shit I better be wearing a cup and other red-man apparel. Just saying. But damn it smells good. rofl

 

[texasislandboy]

Got everything done on the samurai but one wheel bearing. I am planning on getting a front AAL from OME for the stock leaf pack. With just the stock leafs on the lift they are flat..

 

[TacoXpo]

BTW.. my wife gets REALLY violent if I try a hot box/dutch oven.. To the tune that IF I want to pull that shit I better be wearing a cup and other red-man apparel. Just saying. But damn it smells good. rofl

Z tried to make a rule of no farting in bed. Let me just say her ear pinch hurts like a mutha!

 

[tx_shooter]

Rofl

 

[Anathollo]

not exactly what comes to mind when you say hot boxing.

lmao. I was thinking the same thing.

Dutch oven comes to mind.

Glad I was not the only one kind of confused by the mismatch.

You guyz.

 

[tx_shooter]

I pur some new-to-me rims on with some Hankooks. Nothing overly fancy mainly just looking for road miles.

 

[balakay]

Got the fittings I need for the ARB. Just need to plumb the airline and extend the wires to the solenoid. Ordered the stuff to get my Blue Seas fuse box in as well.

 

[thekidcatcher]

ummm got nothing . Though I found a way to remove my cv's with two large nails and a hammer

 

[Silverback]

Large nails and a hammer? Please share?

 

[thekidcatcher]

Well I dunno what the nails are used for but they are probably about 8inches long and 1/4inch diameter. Ill slide one between the diff and the back of the cv, usually goes in by hand with no hammer, then do the other one on the opposite side and usually have to hammer a little. Makes a wedge and pops that ring out of place and you can just pull it out . could be done with any type of wedge but that worked perfect for me

 

[Silverback]

Ahh.. cool. I was thinking smaller nails.. those sound like they are used to kill vampires.

 

[thekidcatcher]

pretty much. They are big mother fuckers