What have you done to your ride lately?

[balakay]

Sexy! Stack some fender washers underneath to get the clearance you need. Also, take into consideration a fully loaded fridge too when you add the spacer.

http://www.toyota-4runner.org/5th-gen-t4rs/192482-5th-gen-arb-fridge-install.html

I just followed this guy's approach. I think the difference is he used that rubber mat and I didn't. I think that gave him the height he needed. So I'll either find some rubber at work to use or I'll just pick up a piece of 1/4" plywood to put on top of the 3/4" I already have. It needs to come up some anyway because the plywood is only 3/4" and the foam that it replaced was 1" so that part of my cargo floor is actually lower and you can tell just by looking. But I'll have to get longer carriage bolts as well because I don't have enough threads to add another 1/4". Which means I have to unbolt the "adapter" from the floor of the Runner. And the way my back is, it looks like it could be a while before I feel like crawling around on the ground. But like I said, it works the way it is just fine, so I'm not in a rush.

 

[tex]

http://www.toyota-4runner.org/5th-gen-t4rs/192482-5th-gen-arb-fridge-install.html

I just followed this guy's approach. I think the difference is he used that rubber mat and I didn't. I think that gave him the height he needed. So I'll either find some rubber at work to use or I'll just pick up a piece of 1/4" plywood to put on top of the 3/4" I already have. It needs to come up some anyway because the plywood is only 3/4" and the foam that it replaced was 1" so that part of my cargo floor is actually lower and you can tell just by looking. But I'll have to get longer carriage bolts as well because I don't have enough threads to add another 1/4". Which means I have to unbolt the "adapter" from the floor of the Runner. And the way my back is, it looks like it could be a while before I feel like crawling around on the ground. But like I said, it works the way it is just fine, so I'm not in a rush.

Let me know if you need a hand. I should probably practice on yours for trial and error purposes.

 

[TacoXpo]

I hope at least one of you takes advantage to this SMOKING Hot Deal and posts up in this thread, your installation. 75 watts of Greatness. Power limit on CB is 4 watts.

#JustSayNoToCBs

http://slickdeals.net/f/8589562-yaesu-ft-2900r-75w-2m-vhf-mobile-amateur-ham-radio-119-free-shipping
http://slickdeals.net/f/8589562-yaesu-ft-2900r-75w-2m-vhf-mobile-amateur-ham-radio-119-free-shipping

 

[Oswego]

NEVER!!!!

CB till the day I die!!!

Them fancy things still don't entice me one bit.

 

[Silverback]

That is a good deal. My Kenwood is only 50 watts iirc

 

[SecretSquirrel]

RCI aluminum tank skid installed...

I need to get this sucker lifted. Was a pita working under it without a lift...

 

[balakay]

RCI aluminum tank skid installed...

I need to get this sucker lifted. Was a pita working under it without a lift...

Those are the next two items on my list. Although I think I may go with a steel gas skid after how much I beat the shit out of my stock one last wheeling trip.

 

[thekidcatcher]

Taking my truck in for the frame inspection tomorrow. Wish me luck

 

[tx_shooter]

Sooo should we wish you a rusty frame?

Tonight I installed some LED interior lights in my 4Runner. It is nice to have a clean bright light. The Tacoma should be done tomorrow night.

 

[SecretSquirrel]

When did you get a letter?

 

[thekidcatcher]

Couple weeks ago. I have till the 31st to get it inspected

 

[SecretSquirrel]

Thought it was almost over...

I was the 1st at my dealer. They've done 5 since...

 

[TacoXpo]

What I would give for a new frame.

 

[TacoXpo]

I'd give even more if I could put about $1000 worth of gusseting and additional welds and proper bungs for things like skid plates, etc.

 

[Boomtacoma01]

Taped out my lines for the front fenders.

I need to check them again tomorrow before I start drinking ...

 

[tx_shooter]

Taped out my lines for the front fenders.

I need to check them again tomorrow before I start drinking ...

So are we talking 9am or right after work?

 

[Silverback]

LOL.. which ever comes first.

 

[Anathollo]

Taped out my lines for the front fenders.

I need to check them again tomorrow before I start drinking ...

 

[thekidcatcher]

Here at the stealership. Let's boogie

 

[Boomtacoma01]

I think they turned out Ok. I still need to check the driver side though. I was a little blurry last night.