What have you done to your ride lately?

TacoXpo

HOAX DENIER
Be careful. You put many more lights on that thing and you will start cracking windshields and having blind spots!
 

PSU Taco85

Well-Known Member
Got the 05 conversion 99% done. Didn't realize the connector for the 2002 running light won't work for the 05-07 headlight housings so I'll have to source a new connector and pigtail.

18581454_10113888399502954_1539975871934632906_n.jpg


18620353_10113888399492974_7434719730947735571_n.jpg


By the time I ran to the auto parts store for some headlight bulbs and ate dinner then wrapped up it got a little dark. I'll need a good shot in the day light but so far I like the look alot better, plus my old headlight housing was cracked and full of water anyway lol

18664554_10113891432280244_5633264452085879525_n.jpg


18620288_10113891432270264_3594268271116784146_n.jpg
 

bakerla

Man, Myth, Legend
Finally got the roof rack on the 4runner. Had to go down to the bank at the end of the street for cover to finish due to the sever thunderstorm that rolled through.
 

Anathollo

Armorall is my choice of lube
Staff member
Got the 05 conversion 99% done. Didn't realize the connector for the 2002 running light won't work for the 05-07 headlight housings so I'll have to source a new connector and pigtail.

18581454_10113888399502954_1539975871934632906_n.jpg


18620353_10113888399492974_7434719730947735571_n.jpg


By the time I ran to the auto parts store for some headlight bulbs and ate dinner then wrapped up it got a little dark. I'll need a good shot in the day light but so far I like the look alot better, plus my old headlight housing was cracked and full of water anyway lol

18664554_10113891432280244_5633264452085879525_n.jpg


18620288_10113891432270264_3594268271116784146_n.jpg
Time to start a Tow pig build thread for this beast!
Also, have you thought about replacing those two flood lights with some DOT LED square lights?

I'll just leave these links here:
Hi/Low beam headlights H13
High Beam Headlights | Low Beam Headlights | H13 High/Low LED Headlight | Led Lights | Led Light Bar | Lifetime Led Lights

Fog lights- H10
LED Fog Lights | LED Fog Light Bulbs | LED Fog Light replacement | 9005-F (H10, 9145) | Led Lights | Led Light Bar | Lifetime Led Lights

Worth every penny IMHO. Pricey upfront but with these, you won't even need a light bar. :)
 

PSU Taco85

Well-Known Member
Time to start a Tow pig build thread for this beast!
Also, have you thought about replacing those two flood lights with some DOT LED square lights?

I'll just leave these links here:
Hi/Low beam headlights H13
High Beam Headlights | Low Beam Headlights | H13 High/Low LED Headlight | Led Lights | Led Light Bar | Lifetime Led Lights

Fog lights- H10
LED Fog Lights | LED Fog Light Bulbs | LED Fog Light replacement | 9005-F (H10, 9145) | Led Lights | Led Light Bar | Lifetime Led Lights

Worth every penny IMHO. Pricey upfront but with these, you won't even need a light bar. :)

Damn you spending all my moneys lol

Hopefully I don't end up with a build thread that will be too expensive, I've got a few other small things planned for it but other than that I'm trying to leave it alone and start the SAS on the 4runner that's been sitting in the garage for the past 2 years.

I may upgrade the fog lights, if I would have known about the LED headlights I probably would have got them to begin with but I just spent $60 on these at the auto store I don't think they will return them. I sourced the marker light socket from the local auto parts store and finished up today. The ones from the 99-02 have a 90* bend and wouldn't fit the new headlights.

http://www.autozone.com/collision-b...uralast-marker-light-socket/801688_72423_4281

I think it turned out pretty good :)

18697975_10113899290202904_7142873508784576081_n.jpg


18619987_10113899290457394_6974953099626550649_n.jpg


Craig (homertaco) made me a custom mesh insert so I got rid of the honeycomb junk that comes stock :D
18447240_10113899290497314_8453861748151708587_n.jpg
 

Oswego

n00b
Looking good Ant! So now you can pick up my truck? lol
 

Anathollo

Armorall is my choice of lube
Staff member
Damn you spending all my moneys lol

Hopefully I don't end up with a build thread that will be too expensive, I've got a few other small things planned for it but other than that I'm trying to leave it alone and start the SAS on the 4runner that's been sitting in the garage for the past 2 years.

I may upgrade the fog lights, if I would have known about the LED headlights I probably would have got them to begin with but I just spent $60 on these at the auto store I don't think they will return them. I sourced the marker light socket from the local auto parts store and finished up today. The ones from the 99-02 have a 90* bend and wouldn't fit the new headlights.

http://www.autozone.com/collision-b...uralast-marker-light-socket/801688_72423_4281

I think it turned out pretty good :)

18697975_10113899290202904_7142873508784576081_n.jpg


18619987_10113899290457394_6974953099626550649_n.jpg


Craig (homertaco) made me a custom mesh insert so I got rid of the honeycomb junk that comes stock :D
18447240_10113899290497314_8453861748151708587_n.jpg
Yeah I have the LED ones for my Tacoma. They are amazing and hands down one of the best mods I've done to the truck. You don't even need lightbars either. :)

Love that grill! Pretty sweet add-on!
 

tex

That's Mr Asshole to you
Took off the rear bumper to start prepping for the CBI. Also discovered they didn't include my jerry can holder that was supposedly delaying the shipment since it was held up at the powder coater. Not real happy about that.
20170531_192533.jpg
 

Oswego

n00b
Took off the rear bumper to start prepping for the CBI. Also discovered they didn't include my jerry can holder that was supposedly delaying the shipment since it was held up at the powder coater. Not real happy about that.

I'm "sure" they just forgot to package it up lol

and thats why I try to never lie to customers. When I forget to order handles or hardware for a entrance I'm selling - I simply tell the customer "they haven't shipped yet, but I'm looking into it and will get back to you ASAP". Way to easy to get caught lying when you're busy.
 
Top