How does that switchback work when you are driving and need the headlights?
What have you done to your ride lately?
- Thread starter jdmcq
- Start date
balakay
BabyMax
That's just his running lights. Headlights should still function like normal.
Taco Loco
Tired and Lazy, married to ‘The Laundry Fairy’
Picked up some 08 heated mirrors. Spent a few hours reading the schematics and studying the wire colors then installing. Wasn't too bad and I'm happy with the results
While I was wiring stuff up and changing bulbs, I converted the brake lights and reverse lights to LEDs. Left is LEDs and right is stock, subtle difference
I then removed the seats and ran the wiring for OEM heated seats, I need to source the connectors for the heated seats as they have more pinouts than the regular power seats
Here's a view at night
I also installed switchback LED running lights/turn signals, they are pretty bright and am happy with how they turned out. I just need to get some brighter headlights now
Nice!
Silverback
Lima Gulf Bravo Foxtrot Juliet Bravo
Taco Loco
Tired and Lazy, married to ‘The Laundry Fairy’
and the NevR Dull for Crome hitch ball!
tex
That's Mr Asshole to you
That is because I didn't use any tire shine...today.
tex
That's Mr Asshole to you
There is a good chance of that
I need to schedule a weekend to take that chance.
tex
That's Mr Asshole to you
making that chainsaw mount I sent you would be a good trade
Sheeet that is done and done. I will send you a text with the numbers I need to make that mount.
Clay bar and wax?
Clay bar and wax?
tex
That's Mr Asshole to you
Yea. With some tire shine
PSU Taco85
Well-Known Member
This VVVV The switchback is the parking light/turn signal bulb. In that video I had the headlights off when I was cycling the turn signals. The headlights still turn on and function the same as before.
Snaking in the Low Range Off Road wiring harness for my e locker. I am trying to make good use a fish tape.
Last edited:
Silverback
Lima Gulf Bravo Foxtrot Juliet Bravo
Getting all "fancy" with fish tape... I just use old coat hangers. 
PSU Taco85
Well-Known Member
Getting all "fancy" with fish tape... I just use old coat hangers.
That's my go to tool for those kinda projects
The e locker wiring harness is in pulled and zip tied nicely into place. I managed to get the plug through the firewall grommet on the driver's side but I had to pull the grommet out first. I do like the way it all went back together really clean though. Tomorrow night I have dinner w/ my sammich maker-in-law and wife in Ft Worth; so it will not be until Wednesday that I get to finish the install. It will be nice to get the e locker finished up.
Last edited:
PSU Taco85
Well-Known Member
Looks great, nice and clean install! I did same thing pulling wires the other weekend on the ford, getting it through that grommet is a bitch, I used a razor to split it a little then pulled it through with my rusty coat hanger
